A good way to recycle the remaining scrapbook PaperA recycled scrapbook paper is to make vintage style jewelry with a resin kit from the craft store.
When casting with resin, the decoration on this high quality paper is beautiful because it is clever, eloquent and has decoration on both sides.
This process can also use the sheets of the old ephemera.
Handmade vintage inspired jewelry is also a cheap alternative to buying antique jewelry that is both expensive and hard to find.
For beginners, all resin kits are the best way to start making custom jewelry.
The kit contains the correct mix of items.
Jewelry can be cast from the molds purchased from the crafts store, and can also be placed in the case of necklaces, bracelets and earrings.
Any type of jewelry can be made of resin, including bracelets, necklaces, earrings and rings.
It may look scary to make resin jewelry, but this is easy to do.
With proper research and preparation, you can make vintage style jewelry. Supplies-
An Epoxy kit consisting of two parts.
These complete kits are ideal for beginners and will be more forgiving and dry slowly if you need to correct them. -
Two plastic cups
Craft stick or toothpick-
Mold or bezzel link (
Jewelry you fill in directly).
If you make jewelry with a standard
plastic mold, you also have to buy a resin release device so that your product does not stick to the mold.
After casting the resin from the mold, no matter where you want to insert the necklace or buckle, drilling is required. -
Scrapbook cutting (
You can put a lot of craft items into the resin).
To cast in resin, high quality paper must be used.
\"Casting\" recasting is the term used to mix the resin mixture and wait for it to dry.
Always follow the manufacturer\'s instructions when preparing the resin. 1.
Prepare the resin according to the manufacturer\'s instructions. 2.
Prepare the photo or scrapbook paper by applying the photo or scrapbook paper on both sides with the Mod Podge or other sealant and have it dry.
Carefully place scrapbook paper/photos or other additives in the center of the bezzel link.
Center with toothpick. 3.
Slowly pour the resin into the mold or bezzel link on scrapbook paper or photos until bezzel is full.
If your scrapbook paper is shifted, you can move it with a toothpick for a few minutes. 3.
As recommended by the manufacturer, how long does the resin \"solidify\" or harden.
It takes 24 hours for most equipment to harden.
Monitor the mixture to ensure that there are no bubbles in the solution.
If the bubble does rise, blow it gently and let it pop up, or poke it with a toothpick. 4.
If you use the bezzel link, you are done.
If the mold is used, remove the hardened resin pieces from the mold.
You can drill holes in resin with a hand drill with a small bit, string your new jewelry on a necklace, bracelet or earrings. 5.
Prepare many compliments for your creative style.
Great jewelry tips
It always works better when the resin mixture is at room temperature or warm.
To remove small bubbles and large bubbles, put the resin mixing bottle into the warm water in the sink for 10 minutes before use.
When mixing the resin, follow the manufacturer\'s instructions.
However, if after mixing the resin, regardless of the direction, until it is completely clear.
This will ensure the coating is perfect. -
Do not fill the baffle Cup with resin solution.
If you are using a small cup, it is better to add the resin to the Cup with a toothpick or craft stick instead of pouring it into the cup. -
If you make a piece of resin and accidentally touch it to leave a fingerprint or have any other defects, you may salvage it.
If the resin is still soft, you can heat it at a low level with a hair dryer to melt the defects on the surface.
If the workpiece is dry due to obvious defects, you can wet the whole workpiece with fine sand blocks until the defect is removed.
Let it dry and remove any sanding dust.
Re-apply to the top with a mixed resin solution and brush.
This will resume the perfect completion.
10 ways to recycle scrapbook Paper 1.
Use high quality leftover scrapbook paper to put wallpaper on your child\'s toy house.
Apply with glue. 2.
Cut off the fancy things left on the scrapbook paper to install and arrange the cap box and jewelry box. 3.
Use die-cut patterns to make exquisite gift labels from waste paper.
The paper can be glued to the pre
Make a gift label or fold it over the gift label. 4.
Cut a card of 2 and 6.
Stick the scrapbook paper to both sides of the cardboard to make a bookmark.
Hole in the top of the card and add some beautiful ribbons for the tassels.
Stand out with beads. 5.
The elegant scrapbook paper can be recycled to make an amazing kitchen cutting board.
Buy standard wood cutting boards.
Collage the matching scrapbook paper onto the cutting board.
Cover the board with thick transparent coated polyurethane.
Let the board dry for many days. 6.
Cut the photo logo from scrapbook paper and decorate the envelopes of cards and gifts. 7.
Pack small gifts with larger pieces of paper.
Elegant ribbon on top. 8.
Create a collage on a blank note card or card.
Cards can be personalized for any holiday or occasion. 9.
Cut scraps of paper into squares to facilitate children\'s crafts such as Christmas cards and decorations. 10.
Create a beautifully matched file collage and place it in a photo frame.
Stick small non-stick materials such as pearls, butterflies or flowers on paper.
Add ribbons to create amazing patterns.
Insert glass.
If you use a shadow box, you can add beautiful items such as silk gloves or waste jewelry.
You have a ready photo!
If you have a need for custom plastic manufacturing moulding company, like , and , you need to be able to find a dependable provider who you can trust when necessary.
Hard work and performance is rewarded through bonuses and commissions. Job satisfaction is very important for employees and owners, Foshan Nanhai Zhuangao Mold Co., Ltd will create a work environment that is enjoyable and profitable for all.
Foshan Nanhai Zhuangao Mold Co., Ltd provides professional , technology and human expertise clients need to find trusted answers. Go to Zhuangao Mold Manufacturer for answers.
Zhuangao is one of the top brands in their class when it comes to moulding company and custom plastic manufacturing. If you check online, Zhuangao is often rated high and reviewed with much praise. we would be very pleased to receive your inquiry.
